Type To Search

Request A Free Quote

Type To Search

NEWS
December 14, 2022by zhang0 Comments

Infrared Therapy Mini Panel

Ⅰ.Product Overview

Infrared physiotherapy mini panel is a kind of treatment instrument, with physiotherapy function, can choose different treatment methods according to the different conditions of patients.  Infrared therapy can improve the microcirculation, promote metabolism, increase cell vitality, enhance immune function and other effects, can improve the body’s resistance to disease, but also reduce the pain of patients.

Ⅱ.Application Field

Infrared physiotherapy mini panel is to convert the infrared radiation energy of the human body surface into heat energy through high-tech means for the purpose of treating diseases. It is suitable for all kinds of people. Including: medical treatment, health care, health. In the process of application, it is necessary to ensure the ambient air circulation and good humidity condition. The adjustment of temperature and treatment time should be based on individual physical condition. It is best to have a special monitor during treatment. Patients should not move or change the position; Should not be used when the body is tired or nervous; Pay attention to local hygiene to prevent cross infection. Each course of treatment is 20-30 minutes, 2-3 times a day, the duration of treatment can be determined with the severity of the patient’s condition. After each treatment, wash the skin, muscles, joints and parts with warm water or cleaning solution; After the course of treatment, if there is discomfort, local anti-inflammatory drugs such as erythromycin ointment can be used to relieve symptoms; You can also apply erythromycin ointment or antibiotic ointment for 1-2 minutes after finishing the course of treatment, and then wash the skin with warm water. Nutritional medication-assisted therapy (e.g., vitamin C) may also be used after a course of treatment. If the patient appears fever, pain and other symptoms should seek medical attention. If there are allergic symptoms or other discomfort, immediately stop using infrared physiotherapy panel treatment, until the condition improves before other treatment operations.

What should be noted when using infrared physiotherapy panel treatment is:

1, Do not use alcohol-based preparations, because their volatilization will cause skin burns;

2, pay attention to the indoor temperature change, avoid the temperature is too high or too low;

3, Patients who have allergic reaction to infrared physiotherapy should stop treatment immediately (if serious symptoms occur, they should see a doctor immediately) and use this product after remission.

Infrared therapy can treat muscle strain, rheumatoid diseases, neuralgia and joint pain and other sports injuries; Also can effectively reduce cold fever, headache and muscle aches and other phenomena. It is also effective in the treatment of some skin diseases.

In traditional Chinese medicine, on the basis of acupuncture, scraping, cupping and massage therapy, biological wave therapy has been added, combining drugs and techniques with modern high-tech means.  The principle of treatment is through the interaction of human meridians and infrared rays, so that drugs and heat energy in the human body thermal effect, so as to play a certain role.

â…Ē.Technical Characteristics

1, It has a strong osmotic effect and local stimulation effect.  Infrared therapy can speed up the blood circulation in the surrounding tissues and promote the metabolism of local cells, which is conducive to the repair of damaged tissues after injury.

2, Infrared therapy can play a dual role of physical cooling and hyperthermia.  Its efficacy is more outstanding than that of drug therapy.

3, can improve the microcirculation, enhance cell vitality.  Infrared therapy is through the skin surface and blood heat exchange to achieve the therapeutic effect, this treatment can promote local blood circulation, increase cell vitality and other effects.

4, it can play the role of promoting blood circulation and removing blood stasis and reducing inflammation and swelling.  Such as: arthritis, back and leg pain, rheumatism and so on.

5, It can enhance the immunity function of human body and improve the resistance function of human body to disease;  It can promote the metabolic ability and detoxification ability of the body.  There are antioxidant components and trace elements and other effects;  It has the effect of promoting blood circulation, increasing metabolism and improving immunity.

6, can play a role in relieving fatigue effect: such as: shoulder periarthritis, cervical pain, back and leg pain and muscle pain;  Can also relieve fatigue, especially long hours of mental and manual labor;  Can improve the quality of sleep, make people sleep more fragrant and sweet;  Improve sleep quality and memory.

7, in the treatment process can also play a beauty and skin care effect and therapeutic effect: such as: treatment of dysmenorrhea and gynecological inflammation effect is very good.

â…Ģ.Function And Characteristics

1, physiotherapy effect: infrared therapy through the local tissue and blood heat exchange, so as to promote blood circulation, increase the role of cell vitality, conducive to the damaged tissue after injury repair.

2, Enhance immune function: infrared therapy can improve the body’s resistance and increase the body’s resistance to disease.

3, Promote blood circulation: infrared therapy can improve microcirculation and increase cell vitality, which is conducive to tissue healing after injury.

4, dredge meridians: infrared therapy has a strong osmotic effect and local stimulation.

5, Improve microcirculation and immunity: infrared therapy can make heat exchange between skin surface and blood to achieve therapeutic effect, which is conducive to the repair of damaged tissues after injury.

â…Ī.Market Prospects

At present, more than 70% of domestic hospitals have been equipped with perfect diagnosis and treatment equipment, and can carry out infrared physiotherapy technology well. However, there is a serious shortage of equipment and technical personnel in primary medical institutions or rehabilitation centers. In particular, there are few experienced physicians, and there is a lack of doctors who have a deep understanding of infrared physiotherapy techniques, effects and principles. With the improvement of people’s living standards, people have higher requirements for health care, so infrared physiotherapy products have broad market prospects.

In addition for some rheumatic diseases, arthritis, cervical spondylosis, lumbar disease, arthritis and other patients is also a very good treatment.

Read More
NEWS
December 13, 2022by zhang0 Comments

Mini Red Light Therapy Panel

Ⅰ.Product Introduction

Infrared physiotherapy refers to the use of infrared heating principle, through the skin, muscles, bones and nervous system physiotherapy, to achieve the purpose of disease treatment and health care. Infrared physiotherapy is a relatively old and very effective means of medical care. The infrared therapeutic device uses the effect of thermal radiation to heat different parts of the body to raise the temperature of the skin, and uses the generated heat to massage and hyperthermia the body. Infrared therapeutic apparatus has been widely used in medical treatment and daily life. Such as acupuncture, cupping, scraping, etc. There are also portable infrared therapy devices such as the Red Light therapy mini panel.

Red light physiotherapy mini panel is a new generation product improved by technology on the basis of traditional red light treatment equipment. Its structure and function is to use optical fiber as the medium, the wavelength of 660nm red light and wavelength of 850nm infrared light after modulation into the body, to achieve the purpose of physiotherapy. It has three characteristics: 1, small size, light weight; 2, the structure is simple and reliable, easy to use; 3, soft light, no dazzling, no damage to the skin. Red Light Physiotherapy Mini Panel is a small tool for skin treatment and health care. It is mainly composed of red light source and optical fiber. Optical fiber is a filament fabric made of glass or plexiglass. It consists of a number of short-wavelength red light sources, which are arranged parallel to each other in a plane, so that they can emit strong radiation for therapeutic purposes. The radiation intensity generated in a ring or ring within a certain irradiated distance is called the effective radiation range within the irradiated region. Because different wavelengths of red light (red) and the vibration frequencies of specific molecules in human tissues are very different, resulting in different vibration frequencies between molecules inside the organism and vibration. Thus can make cells and tissues resonance effect; Different wavelengths of red light also have different effects on human body in biological tissues. Free radicals and other metabolites such as lactic acid are produced in the cells of the body. At the same time, red light can induce corresponding changes in some biomolecules after irradiating into human tissues through specific band wavelength (namely red/green line), and these changes will cause corresponding changes in biomolecules, resulting in a series of metabolites and effects (namely active substances). These substances through the body metabolism in the blood, lymph increased content and with the blood circulation throughout the body to make a series of changes in body function. It has a great influence within a certain range.

Ⅱ.Functional Characteristics

Red light therapy mini panel is composed of infrared radiation source, electronic control technology (switch and control circuit) and optical fiber. Its characteristics are:

1, with high brightness, high quality infrared emission spectrum.

2, soft light, no dazzling, no damage to the skin.

3, the radiation intensity can be adjusted at will, so that the operator can grasp the therapeutic effect and intensity at any time.

  1. The irradiation time can be adjusted to facilitate the use of patients with different needs.

5, small and light, easy to carry.

  1. Stable light source, long irradiation time is not easy to heat (that is, safe and reliable).

7, small size, light weight, easy to operate and low maintenance costs.

8, easy to use, obvious therapeutic effect (that is, no side effects), no adverse reactions.

9, a wide range of application, especially children’s skin and mucous membrane diseases and a variety of skin diseases and arthritis of the prevention and treatment have a good effect.

10, the treatment is simple and easy to operate; Easy to use: the affected area can be irradiated for about 5-10 minutes to take effect (i.e. safe and reliable); No side effects: The use of this product can treat any skin diseases and arthritis and other diseases; Good curative effect and small side effects (i.e. non-toxic and harmless); Safety: no adverse reactions after irradiation; Simple operation: it can be used skillfully without the guidance of medical personnel (i.e. easy to operate); Easy to maintain: easy to operate and learn.

â…Ē.Scope of application

Red light physiotherapy mini panel is suitable for the prevention and treatment of various skin diseases, arthritis, neck, shoulder, back and leg pain and other diseases.  Red light physiotherapy mini panel is mainly suitable for the prevention of the following diseases:

  1.  Tinea pedis: Patients suffering from skin diseases such as tinea pedis can use the red light physiotherapy mini panel for prevention and treatment.
  2.  Herpes zoster: It is a kind of viral infectious skin disease, mainly invading the epidermis or superficial layer of the human dermis, characterized by erythema, blisters and ulcers.  After shingles has healed, scars are left on the skin.  If the patient is found to have a blister on the skin similar to the shape of shingles, the red light therapy mini panel can be used for prevention and treatment.
  3.  Various skin diseases (including psoriasis, vitiligo, tinea body, tinea versicolor, etc.) : red light physiotherapy mini panel has obvious preventive and therapeutic effects on various skin diseases, especially on the treatment of various dermatitis.
  4.  Periarthritis of shoulder is a common chronic injury disease of the upper arm.  It is generally believed that the disease is caused by the rigidity and relaxation of fascia and joint ligament caused by long-term strain and muscle spasm.  The use of red light physiotherapy mini panel for prevention and treatment has a significant effect on relieving shoulder pain.
  5.  Neck, shoulder, back and leg pain: many parts of the human body will be damaged to varying degrees, such as the neck, shoulder or waist;  Limbs and other parts, etc.  Red light therapy mini panel for prevention and treatment can promote local blood circulation, eliminate pain and discomfort, accelerate metabolic function.
  6.  Back and leg pain: those who cause lower limb pain generally suffer from back and leg pain, especially elderly patients who are often accompanied by osteoporosis, hyperplasia of bone or arthritis and other diseases.  Red light physiotherapy mini panel has a good effect on effectively relieving symptoms.

Read More
NEWS
December 3, 2022by zhang0 Comments

Smart Rgb String Lights

Whether it is a family gathering, or a company tearm building, or friends together, they often choose a place with a good atmosphere to carry out, and the rgb atmosphere lamp plays a very big role in the place.

What is an RGB light?

You can think of it as having different colors. In other words, in the dark of night, you turn on the LED. You’ll see a lot of colors. These colors are eye-catching, help you focus and add a different atmosphere to the environment. rbg string lights are widely used in families, hotels, KTV night shows, courtyard lights, outdoor string lights, Parties with music and other interior decorations. Immediately make the environment more active, Immerse yourself in the dazzling environment and feel the passionate moment.

What is the difference between rgb lights and led lights?

rgb lamp is a part of led lamp. rgb led and white led both achieve the effect of white light, but RGB LED lamp produces white light by mixing red, green and blue three colors (RGB initials). LED lights appear directly as white light.

The main difference between them is in the application. At present, RGB is widely used, such as the lamp belt and stage lights. When the five-color lights are lit up at night, you can feel the colorful colors and feel particularly beautiful. Many of these are RGB bead applications. In the application of RGB lights, the controller can be used to adjust the time when different RGB colors light up, the size of the current, control the color depth, and control the formation of multiple RGB lights into beams or fonts and other special effects.

In short, RGB is to make full use of the mixing effect of red, green and blue three primary colors, so that it has a more diversified application effect, while the white light of LED lamp is relatively simple, mainly used for light compensation and lighting. Not as good at color control as RGB lights.

Shenzhen YouLumi Co., Ltd. specializes in the production of LED lighting products.   We have a professional and experienced R&D team determined to overcome the challenges of the development, production and distribution phases of lighting manufacturing. YouLumi’s motivated team members drive the company’s progress in LED technology. Set a benchmark for your industry competitors.

Silicone RGB Hoop String Of Lights Remote Control YL-RL18RGB -30W

At present, the main RGB atmosphere lights are: RGB string lights, RGB ring lights, RGB floodlights, RGB space lights and so on.

LED ring string lights with their gentle, rounded look is much more than it seems. it’s a hanging lighting solution for large spaces: bright, cleverly designed, and boasting head -turning appeal.

LED ring string lights to delivers powerful, ambient lighting. Each of the ten ring lights is glow 270°.Together, color can be set individually for each light: ideal lighting for every occasion!

The perfection solution for a terrace or at the bottom of the garden is, an LED ring string light to come with A 34.61ft matt black cable(including 10 pcs hanging hook) that blends into the background and lets the ring light shine through—like halos of light that seem to float weightlessly in the dark. lt’s easy to hang from a tree or other structure thanks to ten handy hook systems.

LED ring string lights is designed for outdoor use: made from PVC and silica gel, it’s resistant to UV rays, and bad weather. it uses a waterproof power supply and waterproof controller(rating: IP65). So once it’s installed, you can simply forget about it!

This string of lights isn’t just cleverly designed—it’s smart, too! lt’s aquipped with WIFI/Bluetooth technology and can be controlled remotely with the(free)Tuya app, which comes with a range of features that let you easily customise your lighting mood. Together, match with Ble-Bwacon remote control. To kearn more about the app, please contact the manufacturer!

https://youlumi.com/product-category/ring-string-lights/

Read More
Energy StorageNEWSSolar street light
November 25, 2022by zhang0 Comments

Smart Solar Street Lights For Your Courtyard

Solar LED garden lights use solar radiation energy as energy source, solar panels are used to charge the battery during the day, and the battery is used to supply power to the high efficiency LED light source at night, without complicated and expensive pipeline laying, and the layout of the lamps can be adjusted at will.

Solar garden light lighting using power equivalent to 70W incandescent brightness CCFL inorganic lamp, lamp column height 3m, lamp life greater than 20000 hours; power using 35w monocrystalline silicon solar panels, light control timing switch. The quality guarantee period is 25 years, after 25 years the battery components can continue to be used, but the power generation capacity decreases slightly. The power generation system is typhoon resistant, humidity resistant and UV radiation resistant. The system can ensure a daily working time of 4-6 hours in an environment of 40â„ƒï―ž70℃; in case of continuous cloudy and rainy days, the usual excess power will be stored in the battery, which can ensure that the user still has enough power to use normally for 2-3 consecutive days in cloudy and rainy weather.

Solar garden lights mainly rely on solar panels to generate electricity, through the solar controller to store electricity in the battery, no artificial control, regardless of spring, summer, autumn and winter can be automatically based on the level of light, automatically open and close, all charging, discharging, open and closed completely complete intelligent and automatic control. Solar panels in good light conditions photoelectric conversion rate of 16%, the use of life up to 30 years; solar street light controller using light control + time control, waterproof, cold integration design, greatly reducing the failure rate; light source using solar garden light special LED light source, high luminous efficiency, the actual use of life greater than 50,000 hours; light body using Q235 high-quality steel welded from, the appearance of Galvanized plastic spraying, anti-corrosion disposal, no rust, aging resistance, smooth surface, wind resistance greater than 9 levels.

The courtyard light is a decorative product. The design style is either simple and fashionable, or classical and romantic, or luxurious and rich, or exquisite and elegant. The structure is simple and generous. It can show the classical architectural and cultural qualities, but also show the popular and fashionable city style in many ways. Both modern and classical architectural environments have their own rationale. Classical but not archaic, heavy but not lacking in vitality, fashionable but not flashy, floating but not losing the steady atmosphere, very ornamental and use value.

The courtyard light series is a decorative and lighting light source configuration form commonly used in garden scenic areas, cultural and leisure entertainment plazas, pedestrian streets, commercial streets, residential areas, both sides of the traffic lane, etc. It is a decorative lighting product. It is the perfect crystallization of light and shadow, light and art.

LED solar street light mainly consists of the following parts: solar cell component part, battery, special controller for solar street light, luminous body and light pole and lamp housing.

1、Solar battery panel.

Solar panels are the core component of solar street lights, which will convert the sun’s radiation energy into electricity and then transferred to the battery for storage, more practical solar panels are mainly monocrystalline silicon solar cells, polycrystalline silicon solar cells and amorphous silicon solar cells of three kinds, the use of polycrystalline silicon solar cells in areas with sufficient light is better, in areas where light is relatively not very sufficient to use monocrystalline silicon Solar cells are better, while in places where the sun is not enough outdoor use of amorphous silicon solar cells is better.

2, battery.

The main role of the battery is to store electrical energy to make up for the defects of the solar photovoltaic power generation system’s input energy is extremely unstable, the battery mainly has a lead-acid battery, Ni_H battery, Ni_Cd battery.

3, solar street light special controller.

In a solar street light, an essential component is the solar controller, the main role of the solar controller is to protect the battery, by limiting the battery charging and discharging conditions to prevent the battery depth charging and discharging, in places where the temperature difference is relatively large, the solar controller also has a temperature compensation function.

4、Luminous body.

Luminous body is an important indicator of whether the solar street light can be used normally, the general solar street light using luminous body has LED, low-pressure sodium lamp, low-voltage energy-saving lamps and so on. Among them, LED lamp life is long, the working voltage is relatively low, is currently the most widely used solar street light luminous body.

5、Lighting pole and lamp housing.

The height of the lamp pole should be determined according to the width of the road, the illumination standard of the road and the spacing of the two lamps and lanterns, the requirements of the lamp housing is not very high, mainly energy-saving, more practical.

Strengths:

Super long life

Semiconductor chip light, no filament, no glass bubble, not afraid of vibration, not easy to break, long-lasting lighting time, service life of 50,000 hours (ordinary incandescent lamp service life of only 1,000 hours, ordinary energy-saving lamp service life of only 8,000 hours)

Healthy light

No ultraviolet and infrared rays in the light, no radiation (ordinary light contains ultraviolet and infrared rays)

No harmful elements such as mercury and xenon, easy to recycle and use, and no electromagnetic interference (ordinary lamps contain elements such as mercury and lead, and the electronic ballast in energy-saving lamps generates electromagnetic interference)

Protection of eyesight

DC-driven, no strobe (ordinary lamps are AC-driven and are bound to produce strobe)

High light efficiency

90% of the electrical energy is converted into visible light (80% of the electrical energy of ordinary incandescent lamps is converted into heat and only 20% into light)

Safety factor

Low-voltage DC power supply, more safe and reliable, long service life, also has anti-theft function, strengthen the safety of the lamp itself, can be used in mines and other dangerous places

YOULUMI Solar garden lights

BMS technology speeds up the battery charging over 30%;

Never stop lighting with New HI-technology-ALS 2.3 Up to 10 rainy or cloudy days

Powerful Lithium battery with 1500 cycles, widely used in new-energy can

4 Intelligent Core Technology broke the bottleneck of short working time of solar lights in rainy/cloudy days, and realized100% lighting throughout the year

Intelligent drive LED management, Use with community courtyards, parks, etc.

Each part can be replaced on the pole directly. save maintenance costs.

Read More
Energy StorageNEWSSolar street light
November 25, 2022by zhang0 Comments

What Are The Pitfalls Of Solar Street Lamp Procurement?

Today, solar street lamps are widely used, but now the solar street lamp market price varies, solar street lamp manufacturers produce uneven quality. It is inevitable that some manufacturers will hype up their own products, but the quality of the product has brought a significant bad impact, so when purchasing solar street lights, we should pay attention to avoid falling into the trap given by the manufacturer, so, what is the trap that solar street lights purchase need to pay attention to?

solar street light

1, counterfeit chips, low-end chips

The core of LED lamp is the chip, which directly determines the performance of the lamp! However, some bad manufacturers take advantage of customers’ unprofessionalism and use low-cost chips to make customers buy low-quality products with high unit price, resulting in direct economic losses and serious hidden dangers to the quality of LED lamps.

2. Configure virtual tags and exaggerate configuration parameters

The hot  LED street lighting  is also accompanied by the reduction of price and profit, the fierce competition has also led to many solar street lamp manufacturers began to cut corners and falsely label product parameters, the wattage of theLED solar outdoor light source, the wattage of the solar panel, the capacity of the battery, and even the material used in the solar lamp pole have problems. Of course, this is also caused by the customer’s repeated comparison of prices and demand for low prices, and it is also related to the practices of some manufacturers.

3. Poor heat dissipation design and unreasonable configuration

In the aspect of heat dissipation design, the PN junction temperature of LED chip increases by 10 degrees, and the life of semiconductor devices will decrease by multiple. Due to the high brightness requirements of LED solar street lights, the use of the environment is harsh, if the heat dissipation is not solved well, it will quickly lead to LED aging, stability reduction. In addition, unreasonable configuration often leads to the specific use situation can not reach the expected value.

4. Copper wire impersonating gold wire and controller problems

Many LED manufacturers are trying to develop alternatives such as copper alloy, gold-covered silver alloy wire, and silver alloy wire to replace expensive gold wire. Although these alternatives are superior to gold wire in some characteristics, they are much less stable in terms of chemical stability, for example, silver wire and gold-covered silver alloy wire are susceptible to sulfur/chlorine/bromine corrosion, and copper wire is susceptible to oxidation vulcanization. For encapsulated silica gel similar to absorbent breathable sponge, these alternatives make the bonding wire more vulnerable to chemical corrosion, the reliability of theLED solar outdoor light source is reduced, the use of a long time, LED beads are more likely to break the wire dead lamp.

YOULUMI Co., LTD., located in shenzhen City, the transportation is more convenient, is one of the important lighting production bases in China, The factory has strong technical force, high – quality technical personnel, efficient production capacity. Specializing in the production of garden lights. High pole lights. Lawn lights. Street lamps. Mining lamps. Throw light. Riot light. Landscape lights, etc.

The company adheres to the core values of “integrity, responsibility, win-win cooperation” and implements coordinated development.

SHENZHEN YOULUMI Co., Ltd. is a professional  LED street lighting  manufacturer, lithium battery street lamp manufacturer, is a collection of lithium battery street lamp, led street lamp, solar street lamp, High pole lamps and other products design, research and development, manufacturing, installation, service integration of outdoor lighting enterprises, manufacturers have large CNC bending machine, aluminum die casting machine, hydraulic tension machine, double station powder electrostatic spraying line, automatic cutting, submerged arc welding, gas welding, car, planing, drilling, bending and other more than 100 sets of equipment, the monthly production capacity of nearly ten thousand sets. Various talents 450 people (note: because the factory automation degree is higher so the personnel is not particularly many, 450 people do not include temporary workers) the company in line with the company in line with the quality of survival, in good faith market business philosophy; To customer satisfaction, tree brand development ideas, technological innovation, the establishment of long-term quality files, continuous improvement and improvement of the production process, the establishment of sound rules and regulations.

After more than ten years of development, the company’s products have been sold all over the country, and exported to Southeast Asia, the Middle East and Africa. Established a good reputation, the customer praise.

Our “quality of survival, reputation and development” and with complete after-sales service to win the trust of the majority of users, “YOULUMI” sincerely welcome the majority of users to visit guidance, investigation, negotiations.

We will carefully provide every customer with high quality service, we sincerely hope to be able to our every drop of sweat, aggregate into the power of progress, with every bit of our heart, add the color of your life, with every time we pay, boost your growth pace.

Read More
Energy StorageNEWSSolar street light
November 25, 2022by zhang0 Comments

Integrated Solar Street Lamp And Split Solar Street Lamp Structure And Advantages And Disadvantages Comparison!

Integrated solar street lamp and split solar street lamp belong to two different structures, they have their own advantages and disadvantages, in the selection, we must have a full understanding of the structural performance of the two, so as to choose the right type of street lamp according to the needs, the following is the structure and advantages and disadvantages of integrated solar street lamp and split solar street lamp comparison!

Structural comparison between integrated solar street lamp and split solar street lamp:

Integrated solar street lamp is relative to the split solar street lamp. Simply put, the battery, controller and LED light source are concentrated into one, made into a lamp head, and then configured with panels, lamp poles or arm installation. It is characterized by convenient installation, can be said to be a fool installation, will screw will be installed, removed from the traditional split solar street need to install the panel bracket, install the lamp head, make the battery pit and other steps, greatly saving labor costs and construction costs.

In terms of performance, integrated solar street lamps have been upgraded in terms of design performance, such as batteries. Now most street lamp batteries are installed with lithium batteries, which are much higher than traditional street lamp batteries in terms of performance.

Integrated solar street lamp

solar street light

Comparison of advantages and disadvantages of integrated solar street lamp and split solar street lamp:

1, the advantages of integrated solar street lamp, on the one hand, is easy to install and use, customers can in the absence of any professional knowledge, simply install a few screws according to the instructions, fixed the product can be used, very convenient and save the installation cost.

2, the price advantage is obvious, the integrated solar street lamp because of the design reason, the panel power and battery capacity is generally relatively small, the cost is relatively low. More because it saves the cost of installing the fixed bracket of the panel, the cost of the battery box and so on, compared with the split solar street lamp, the price is relatively lower. His application occasions are not too high lighting requirements, in contrast, the price advantage is very obvious. Usually, the price of split street lamps is about 40% to 60% more expensive than integrated solar street lamps.

3, Split solar street light adopts the separate design of panel, battery and LED lamps. According to the requirements of lighting occasions, the required power of led street light can be calculated, with the power optional range of 20W-120W to meet the requirements of different customers. And according to the requirements of LED street lamp, suitable power panels and batteries can be adapted, which can not only ensure the service life of LED street lamp, but also because the conventional battery and intelligent controller is placed at the bottom of the light pole, convenient maintenance and replacement, saving the later maintenance cost.

4, split solar street lamp maintenance is much more complex, when there is damage, the manufacturer needs to send technicians to the local maintenance, maintenance needs to be from the battery, photovoltaic panel, LED lamp, wire and other troubleshooting; All-in-one solar street lamps just need to be unloaded and sent back to the factory.

Split solar street lamp

5, In terms of the scope of use, according to the technical parameters, split solar street lights are generally mainly used in large roads, highways and other places with high demand for lights, while integrated solar street lights can be used in streets, communities, factories, rural areas, county streets, village streets and other places.

6, in terms of technical parameters, split solar street technical parameters can be from 10-80W or even higher, such as: new rural solar street series, in the configuration, according to the wattage, rainy days and other technical parameters to the corresponding configuration of battery, photovoltaic panel size, controller, but also need to adjust the photovoltaic panel irradiation Angle according to the actual installation; Integrated solar street lamps now generally have several wattage of 10w, 20w, 30w and 40w, each of which is the best configuration based on a long time experiment, such as 3-6 meters 20W new rural solar street lamps.

The above is the structure and advantages and disadvantages of integrated solar street lamp and split solar street lamp. It is not difficult to find that the two have great differences in component structure, price, range of use, installation and maintenance methods, technical parameters and other aspects, but each has its own advantages.

Read More
LED LightsLED Work lightsNEWS
November 25, 2022by zhang0 Comments

The Invention That Changed The Lighting Industry

Back in 2014, the Nobel Prize in Physics was awarded to Isamu Akasaki, Hiroshi Amano, and Shuji Nakamura – the creators of the blue light emitting diodes, also known as LEDs. The winners will join a prestigious list of 196 other Physics laureates for their invention that has illuminated the 21st century.

A century ago, people used to illuminate their houses with kerosene lamps or candles, and they all got shocked with Thomas Edison’s invention of the incandescent lamps in the 1880s. Even though that they served as a perfect source of light, they weren’t energy efficient at all.

The search for an energy saving alternative was the focus of every lighting development ever since. It looked like that nothing could replace incandescents from the American households until the appearance of the LED lights.

Back in 1862, the first LED lights were introduced, but they glowed only in the infrared range, which made them suitable for a small array of products such as digital clocks and indicator lamps. Creating a LED light that glowed in white light was a difficulty that took around thirty years for scientists to overcome.

The first bright blue LED was revealed in 1993 by Shuji Nakamura, who built on the work of his colleagues – Akasaki and Amano. Now, LED lights are gaining an immense popularity as they are being used for cellphones lights, table lamps, traffic signals, computers and almost everything that requires energy-efficient light. The white LED lamps are highly used in offices as they consume much less energy than the traditional ways of illumination.

As competition grows, the prices of this new technology fall and become even more affordable to consumers.

Every time scientists unveiled a new light source, people declared that incandescent lights are becoming a thing of the past. However, it took more than a century for an alternative to beat its predecessor!

Unlike incandescent bulbs, LEDs convert electricity into photons instead of turning it into a mixture of heat and light.

Unlike incandescent bulbs, LEDs convert electricity into photons instead of turning it into a mixture of heat and light.

During the awarding, the Nobel committee said that incandescent lamps lit the 20th century, while LED lights will light the 21st century. In fact, around 20% of the world’s electricity is used for lighting and the LED technology could reduce that amount to 4%. Moreover, they can run on solar power, which means that they can help more than 1.5 billion people who don’t have access to electricity.

If you are looking to invest in the future, then you might want to replace the traditional lighting in your house with a more futuristic technology such as the LED bulbs.

What should know about LED

Are your old incandescents burning out one after another? Then it might be time to consider a more advanced technology such as the LED. LEDs are the future of the lighting industry as they can have a lifespan of up to twenty-five years and they are energy-efficient.

However, there are many varieties of the LED lights and choosing one depends on few factors. Here’s what you need to know before heading to the store.

Lumens replace watts

When shopping for incandescent bulbs, people used to look at the watts to determine how bright the lamp is. However, the brightness of the LEDs is determined by lumens as they draw far less energy than traditional bulbs.

To make a comparison, 60W incandescent bulb is going to be around 8-10 watts for a LED Bulb. That’s where lumens come to the rescue.

A lumen (lm) is a measurement of brightness for a LED light bulb, and it is what you should be looking at when purchasing lights.

Choosing the right color LED

Incandescents provide a warm yellow color that’s perfect for homes, whereas LEDs come in a variety of colors – from purple to red. Moreover, there are even different types of white and yellow.

If you are looking for a color that is suitable for your home, then you might want to consider “warm white,” “soft white” or “bright white.”

The first two will provide a yellow-like color that’s similar to incandescents, while the “bright white” color is close to the one we see in retail stores and it resembles the daylight.

Look at the kelvins of the light bulb when buying one. The lower the number is, the warmer the light will be. If you are looking for an incandescent color, then you will need something between 2,500-3,500 kelvins.

Replacing the old lights with LED bulbs should be considered as a long-term investment. They are much more expensive than traditional ones, but their prices have decreased due to the large competition in the industry.

Even though that you have to pay more upfront, the LED bulb will pay off throughout the years as they have a longer lifespan and consume much less energy than others.

Some fixtures aren't compatible with LEDs

You must ensure that the place you want to put the LED bulb is suitable or else it might kill it faster. Many people believe that LEDs don’t produce heat, but they do. However, it is pulled away from the bulb into the air and this way the bulb stays cool, preserving its life expectancy.

Nevertheless, if the light bulb is enclosed, the heat won’t be able to escape, which would result in a shorter lifespan. However, there are LED bulbs that are especially approved for enclosed spaces.

The benefits of LED Lights

Currently, the award-winning LED Lights are considered as the most efficient and cost-effective way to illuminate your property. The light emitting diodes are by far the most eco-friendly way of illumination, and the provided benefits are not only for us humans but the whole planet.

Here are the top benefits of the LED Lighting:

I. Longer life expectancy

One of the biggest benefits of this new technology is the provided lifespan of LED lights. Studies show that a single bulb can operate up to 100.000 hours or for up to 25 years. In fact, if you leave a LED fixture to work for 8 hours a day, it will be operational for the next two decades.

Unlike standard lights that burn out, LEDs become less bright when they are being used over an extended period of time, but they continue to work.

II. Energy-efficient

When compared to incandescent light bulbs, the estimated energy efficiency of a LED light is up to 80%. This means that only 20% of the electric power is lost, while the other percentage is converted into light. With traditional light bulbs, the ratio is the same, whereas 80% of the electricity is lost.

When you take the long operational lifetime into account, the LED light bulbs become even more efficient, especially in large scale projects.

III. Eco-Friendly

The traditional lighting bulbs contain dangerous chemicals that can hurt the environment significantly. LED lights are free of toxic materials, and they are 100% recyclable. Moreover, the long lifespan means that one bulb can replace 25 incandescent bulbs.

IV. Greater Quality

The materials that make the LED lights are extremely durable, which means that they can withstand even the most adverse weather conditions.

They are perfect for outdoor systems due to the fact that they are shock and impact resistant. With LED lights, you can rest assured that the extreme weather conditions won’t destroy your lighting system.

V. No UV Emissions

LED lights don’t produce UV emissions, which makes them suitable for goods that are sensitive to heat. Moreover, you can illuminate UV sensitive objects such as archaeological sites or even galleries.

VI. Extreme temperatures

Unlike fluorescent lamps, LED lights aren’t influenced by hot or cold outdoor temperatures and their operation isn’t affected in any way. This makes them perfect for areas with winter settings such as freezer rooms.

VII. Frequent Switching

LED lights can be switched on and off multiple times without affecting its lifetime. Moreover, they brighten up instantaneously, which makes them suitable for outdoor projects.

Traditional lighting may take up to few seconds to reach full brightness, and the frequent switching can reduce their lifespan considerably.

VIII. Low-voltage

The LED system doesn’t require a high-voltage power supply, which makes them suitable for remote areas. Moreover, you can connect an external solar-energy source, which will surely power the LED Lighting providing the necessary illumination.

Read More
Energy StorageNEWSSolar street light
November 25, 2022by zhang0 Comments

Solar Street Light

Every commercial solar-powered streetlight system comes complete with a self-contained solar power assembly sized to run the specified solar light fixture as per the requirements set by our customer. Our team designs each solar LED streetlight system based on how much power the fixture consumes and the available sunlight provided by the geographical location of installation. The battery backup provides a minimum of five days of autonomy for extended battery life and considers local weather conditions.

Solar power assemblies range from 30 Watts to 550 Watts, and battery assemblies are available from 36 Amp-hours to 672-Amp hours. The complete solar street light system comes with a controller to operate the light fixtures per the specified operation profile, which is set up with the solar specialist during project analysis. The solar and battery are selected to operate the load for the set period of time with plenty of backup power for times of inclement weather.

   Various commercial solar-powered LED street light fixture styles are available, from standard Cobrahead fixtures to architectural style fixtures. Each solar LED streetlight fixture provides the needed lighting levels and distribution pattern to provide the perfect lighting solution to meet the application’s requirements. Some solar streetlight fixtures feature Dark Sky, FWC, and Turtle Friendly options.

   Fixture arms range from short straight arms to long upsweep side of pole brackets. We design all our poles with the complete commercial streetlight system aesthetic in mind and ensure structural integrity to handle the local wind load requirements of the installation area. 

Why choose solar street lights?

solar street light

Do you know how many solar-powered streetlights save enough energy to power an electric car for a whole year? 100? 1,000? In fact, it’s just 15. Now imagine how much energy you could save with a citywide rollout.

Solar is widely considered to be the most effective form of renewable energy, and the technology is advancing every day. Philips has a range of products that help keep energy bills down and have a positive impact on the environment. And as you can see, the saving potential is extraordinary.

As mentioned, Solar LED Street Light fixtures are akin to taking a page right out of the future of technology. This is not only because they are green-friendly and help us reduce our carbon footprint but also because they can be used with solar panels, which allow them to become self- sufficient lighting sources. In other words, these solar LED street lamps can be charged during the day so they can be prepared to work all night. This makes solar area lights much more efficient than their traditional counterparts. Additionally, these lights also come complete with a 5-year, 50,000-hour warranty. This makes them a worthwhile investment for businesses and organizations of all kinds.

Moreover, despite the fact that Solar LED Street Lights have been around for quite a while, they have recently received an aesthetic upgrade. While they used to be bulky in appearance and were accompanied by a huge solar cell, the new age LED light fixtures are sleek, and much more attractive than their old counterparts. They also come equipped with a built-in battery and smart controller, which makes them the quintessential Solar LED street light fixture solution. Also, given that they are programmable and come complete with a dusk to dawn sensor, this makes them easy to use and control.

solar street light

Overall, if you are looking to buy solar LED street lights, Olympia Lighting has you covered. These lightweight lighting solutions come with convenient dusk to dawn sensors, making them the top go-to for those searching for high-quality street lights. As they are easy to use and maintain, this makes them one of the most cost-effective options in terms of street light fixtures. If you are in need of premium quality street light fixtures, contact Olympia Lighting today!

Solar LED street lights are a solar solution that replaces traditional street lights by combining solar energy and LED light sources. Solar panel street lights can not only meet the basic functions of lighting, but they can also provide brightness that can reach 2-3 times the brightness of the traditional ones. 

Moreover, the power consumption of solar-powered street lights is also much lower than traditional types. In terms of service life, theoretically the solar street lights’ lifespan is 1-2 times of traditional street lights. So solar street lights have become the priority choice for road lighting construction in the world. 

As one of the professional solar street lights manufacturers in china, Youlumi can offer you high-quality solar street lighting systems and solar-powered street lights at good prices. Feel free to contact us now!

Read More
electricityEnergy StorageNEWSSolar street light
November 25, 2022by zhang0 Comments

Advantages of Solar Light

Solar power light is energy from the sun that is converted into thermal or electrical energy. Solar power is a kind of inexhaustible and environmentally-friendly new energy resources. The solar street light is one of the applications of solar power.The use of solar power for illuminating streets and other public places is getting popular day by day. It has become a dependable source of lighting streets around the globe. There are multiple benefits of using solar street light fixtures, like conservation of energy, use of a conventional source of energy, and less dependence on the national grid. Tropical countries that receive ample sunlight most time of the year can be highly benefited from this source of light.Solar street lights are water-resistance and weatherproof and have a low glare and low insect attrition rate. The solar panels in these lights convert solar energy into electrical energy that gets stored in the inbuilt battery and is utilized for dusk-to-dawn lighting operations.Solar street light has the advantages of stability, long service life, simple installation, safety, great performance and energy conservation. This kind of light can be widely installed in urban roads, living districts, factories, tourist attractions and parking lots.

System structureïžš

The solar power light is composed of solar cell module, some LED lamps, control box (the control box is equipped with charger, controller and battery) and lamp pole. The solar panel has a high efficiency of 127Wp/m2, which is very beneficial to the wind resistance design of the system; In the lamp cap part, 1W white LED and 1W yellow LED are integrated on the printed circuit board to form a lattice with a certain spacing as the plane light source. The control box is made of stainless steel, beautiful and durable; The maintenance free lead-acid battery is placed in the control box and the special charging controller for solar street lamps is successfully developed using the patented slow pulse fast charging and discharging technology. The system uses valve regulated sealed lead-acid battery, which is also called “maintenance free battery” because of its little maintenance, which is conducive to reducing system maintenance costs; The design of the charge and discharge controller gives consideration to the complete functions (including light control, time control, overcharge protection, over discharge protection and reverse connection protection) and cost control, so as to achieve a high cost performance ratio.

solar street light

Operating Principleïžš

Solar led lights is an electric lamp that is converted into electric energy by solar panel. In the daytime, even on cloudy days, the solar generator (solar panel) can collect and store solar energy. As a safe and environment-friendly new electric lamp, solar led lights has been paid more and more attention. The working principle of solar lamp is simple. The solar cell made by the principle of photovoltaic effect receives solar radiation energy during the day and converts it into electrical energy output. It is stored in the battery through the charge and discharge controller. At night, the illumination gradually decreases to about 101ux, and the open circuit voltage of the solar panel is about 4.5V, The charge and discharge controller acts after detecting this voltage value, and the battery discharges the lamp cap. After the battery is discharged for 8.5h, the charge and discharge control will act and the battery discharge is completed. The main function of the charge and discharge controller is to protect the battery.

Performanceïžš

The solar led light, which belongs to the technical field of lamps, can be widely used for ornament and decoration on grass, squares, parks and other occasions. The lamp cover is mainly used to connect the bottom bracket. The battery panel is placed on the battery box and embedded in the lamp cover. The battery box is installed on the bottom bracket. The LED is installed on the battery panel. The solar panel uses wires to connect the rechargeable battery and the control circuit. The utility model has the advantages of integrated, simple, compact and reasonable structure; No external power cord, easy to use and install, beautiful appearance; Since the light emitting diode is arranged in the bottom bracket, the whole lamp body is illuminated after emitting light, and the light perception effect is better; All electrical components are built-in and have good practicability. It includes snake lights, plate lights, solar neon lights, massage lights, etc.

In practice, of course, solar outdoor lighting is a little more complex. In addition to large capacity batteries and solar panels, the system also includes advanced special monitors. When the lighting is stopped, the solar power battery starts to charge, and then gets more power when it is recharged. The key is that solar outdoor lighting and solar photovoltaic houses are equipped with solar panels, which have a dedicated microprocessor control system and batteries. It is connected to specially designed load lamps equipped with super reflectivity and high energy ballasts. The utility model has the advantages of high brightness, simple installation, reliable operation, no cable laying, no conventional energy consumption, long service life, etc. It is designed with high brightness LED, without manual operation, and the lamps will automatically light up in the dark and turn off in the morning. The solar led light have a strong sense of fashion, bright texture, fine and modern. They are mainly used for the lighting decoration of green belts in residential areas, industrial parks, tourist scenic spots, parks, courtyards, square green spaces and other places.

solar street light

Advantages:

1、Simple installation

The installation of street solar light is simple and convenient without complicated new wiring. It only needs a concrete base and a battery pit. The installation doesn’t need a lot of labor forces, materials and financial resources.

 

2、Energy-saving and environmentally-friendly

The street solar light light converts the sunlight into electricity without electricity consumption. It produces no pollution and no radiation, which conforms to the present environmental protection concept.

 

3、Safe and durable

The traditional street light may have hidden safety hazards due to construction quality, material aging and power supply disorder; while the solar street light does not utilize the alternating current so that it will not have hidden safety hazards. Nowadays, most solar modules in the market have stable performance for at least ten years due to the mature manufacturing technology. They can generate electricity for twenty-five years or even longer.

 

4、High technology and low maintenance costs

Regulated by solar charge controller, the solar street light can adjust the light intensity according to the natural brightness and people’s demand. In the remote regions, the maintenance cost for traditional street light is high. However, the solar street light only needs cyclical inspection, thus the maintenance cost is relatively low.

Read More
Energy StorageNEWSSolar street light
November 25, 2022by zhang0 Comments

How Solar Street Lights Benefit Our Life

Solar street lights are receiving increasing popularity all over the world. The credit goes to the conservation of energy and less dependency on the grid. Solar lights can be the best solution where ample sunlight is available. Communities can use natural light sources to illuminate parks, streets, gardens, and any other public areas.

Solar-powered street lights can offer environmental-friendly solutions to communities. Once you have installed solar street lights, you will not have to rely on the grid for electricity. Also, it will bring positive social changes. The solar street light price is less if you consider the long-term benefits.

solar street light

What Is Solar Street Light?

Solar street lights are street lights powered by sunlight. Solar lights use solar panels. Solar panels use sunlight as an alternative source of the energy. The solar panels are installed on the pole or the lighting structure. The panels will charge the rechargeable batteries and these batteries will power up the street lights at night.

In the current condition, solar street lights are well-designed to serve uninterruptedly with minimal intervention. These lights are powered by in-built batteries. Solar lights are considered cost-effective. Also, they will not harm your environment. These lights will light up the streets and other public spaces without relying on the grid. Solar lights are highly appreciated for some advanced features. These are well-suited for both commercial and residential applications. They look impressive and last long without much maintenance.

How Do Solar-Powered Street Lights Work?

Solar energy usage is not new to this world. Currently, we are using solar energy to power up our devices and our home or office premises. Solar street lights will serve the same purpose. The unparalleled quality and highly efficient ability of solar light make it the best choice for outdoor use. Solar-powered street lights can be installed in all public places.

The YOULUMI solar street light solutions can be the best choice for gardens, parks, schools, and other institutions. Different types of solar street lights are available. They can be used for decorations, illuminations, and other purposes. By using solar street lights, users can promote sustainable energy and minimize pollution significantly.

As stated earlier, solar panels play a key role in solar lights. The solar street lights have some components that include PV modules , controller, GEL battery, lithium battery and light pole.

solar street light

The YOULUMI solar street light solutions can be the best choice for gardens, parks, schools, and other institutions. Different types of solar street lights are available. They can be used for decorations, illuminations, and other purposes. By using solar street lights, users can promote sustainable energy and minimize pollution significantly.

As stated earlier, solar panels play a key role in solar lights. The solar street lights have some components that include PV modules , controller, GEL battery, lithium battery and light pole.

The YOULUMI solar street lights are easy to install and easy to transport as well. During the daytime, the solar panels will store the solar energy in the battery. They will absorb the energy and pass it to the battery. During the nighttime, the motion sensor will work to control the light. It will start working automatically.

What Are the Benefits of Solar Street Lights?

The key benefit is the environmentally friendly solution. After installing solar street lights, users can rely on solar energy to power up the streets and other public spaces. As mentioned above, solar street lights are more advanced now. When it comes to the benefits, there are many.

Green Alternative

In traditional lighting, people rely on the grid for energy. During the blackouts, there will be no light. However, sunlight is available everywhere, and it is abundant in many parts of the world. Sunlight is the leading renewable energy in the world. The upfront cost might be a bit more. However, once the installation is done, the expense will be less. In the current condition, solar power is considered the cheapest source of the energy.

As it comes with an in-built battery system, you can power up the streets when sunlight is not available. Also, the batteries are recyclable and will not harm the environment.

Cost-effective Solution

Solar street lights are cost-effective. There is not much difference between the installation of the off-grid solar and grid system. The key difference is that meters will not be installed in solar street lights. Installing a meter will contribute to the end cost. Also, trenching the grid power will increase the installation cost.

Safe Installations

While installing a grid system, some barriers such as underground utilities and the root system might cause interruptions. The electric trenching will be an issue if a lot of obstacles are there. However, you will not experience this problem while using solar street lights. Users just need to set a pole wherever they want to install a solar street light.

Maintenance-free

Solar street lights are maintenance-free. They use photocells, and that minimizes the maintenance requirements significantly. During the daytime, the controller keeps the fixture off. When the panel does not produce any charge during dark hours, the controller turns on the fixtures. Also, the batteries come with five to seven years of durability. The rainwater will clean the solar panels. The shape of the solar panel makes it maintenance-free as well.

No Energy Bill

With solar street lights, there will be no energy bill. Users will not have to pay the power bill every month. That is going to make a difference. You can use the energy without paying monthly energy bills.

Conclusion

Solar street lights can meet the lighting needs of communities. The high-quality solar street lights will boost the look and feel of the city. The upfront cost might be a bit more.

However, there will be no blackouts and energy bills. As the operating cost will be zero, the community members can spend more hours in the park and public places. They can enjoy their favorite activities under the sky without bothering about the power bill. Also, lighting will minimize criminal activities and create a better and safer environment for people.

solar street light

Read More

Request A Free quote

Fill out the form below and we will get back to you within the next 24hours.

  • * Don't worry, we don't spam.

Send The request

Fill in the form below to book a 30 min no-obligation consulting session.

I will reply within 24 hours. Give you a quote as soon as possible

Request A Free Quote

Fill out the form below and we will get back to you within the next 24hours.

logo