Read More

Infrared light physiotherapy belt for both people and pets

In order to honor their parents, many children buy infrared physiotherapy belts for their elders during the New Year holidays. Some friends will be worried about the infrared belt will not have side effects, not quite clear about the principle of lumbar belt, and the scope of application, etc. Today, I will explain to you in detail.

What is the principle of red light therapy lamp?

Infrared ray can be roughly divided into three parts, namely, near infrared, wavelength of (3 ~ 2.5) um ~ (1 ~ 0.75) um between; infrared, wavelength of (40 ~ 25) um ~ (3 ~ 2.5) um between; far infrared, wavelength of 1500 um ~ (25 ~ 40) um between.

Among them, the wavelength of 760nm ~ 2000nm near infrared wavelength, is the human body can accept the strongest penetrating ability of the treatment light, its energy can reach the subcutaneous tissue 8 ~ 10cm deep, penetrate the skin, subcutaneous tissue directly to the bones and organs.

The role of infrared physical therapy lamp

Infrared light on the human body, in terms of it and the human body has a very obvious heat-poly effect. Then I explain to you here, because the near-infrared light waves match the human body’s radiation, which can produce a warming effect, and the heat is easily absorbed by the body tissues.

Which can cause vasodilation, accelerated blood flow, improved local blood circulation, and enhanced tissue nutrient metabolism, because it promotes human metabolism, infrared light is also known as the “light of life “In this way, it can accelerate the absorption of local exudates, such as bruises and fluid accumulation, promote the decreasing of swelling, and enhance the self-repair of joints and bone tissues.

Infrared light, from the perspective of human cells, activates tissue cells. When the human body is irradiated by infrared light, it can cut off the long chains of certain connective macromolecular groups (30-40 water molecules) in the body, forming small molecular groups composed of 5-6 water molecules, so that the number and speed of water molecules penetrating into the cell membrane are greatly increased. 

On the one hand, it cleans the cells and strengthens the discharge of toxic substances; on the other hand, it strengthens the exchange of oxygen and nutrients, and other materials and energy, so that the cell membrane and intracellular calcium ion activity is enhanced.

Infrared light can improve microcirculation. Microcirculation refers to the blood circulation in the microvessels between micro-arteries and micro-veins. Its basic function is to realize material exchange between blood and tissue cells, transport nutrients (including nutrients and oxygen) and excrete waste (including carbon dioxide and metabolites), so the microcirculation is the “second heart” of the human body. 

Under normal conditions, the microcirculatory blood flow is compatible with the metabolic level of human tissues and organs, so that the physiological functions of all organs in the body can operate normally. 

When the microcirculation dysfunction or the microcirculation blood volume perfusion is reduced, it cannot meet the needs of tissue oxidation metabolism and causes tissue and organ dysfunction or failure, which is an important reason for the occurrence and development of many diseases.

Combined with the above principles, that is why NIR therapy is widely used in the clinical treatment of inflammatory diseases.

The principle of infrared physiotherapy lumbar belt heating is actually to add massage effect on the basis of infrared light, which can stimulate human acupuncture points, such as for dysmenorrhea patients, can effectively massage the Zhongji point, Guangyuan point, uterus point, these points are important points related to the future of women. 

When these points are massaged through the use of a self-heating magnetic therapy belt, it will have the effect of warming the uterus and the abdomen as well as the stomach, eventually allowing the pain of dysmenorrhea to ease or even disappear, curing the uterine cold and successful conception.

red light therapy for full body

The scope of application of infrared physiotherapy lumbar belt

  1. lumbar muscle strain. The use of the body’s own energy and moisture, continuous release of thermal energy, close to use for about half an hour can feel the obvious heat therapy effect, improve human microcirculation, accelerate metabolism, and quickly eliminate fatigue.
  2.  lumbar disc protrusion, lumbar disease patients. Due to the role of magnetic lines, the formation of magnetic fields around the waist, through the continuous diffusion of magnetic waves and stimulation, the human skin can be micro-kneading, so as to achieve the role of muscle relaxation. The support strip piece not only plays a supporting role, but also plays a certain traction role on the waist.
  3.  suitable for dysmenorrhea, kidney deficiency, spleen and stomach disorders, the body is afraid of cold, postpartum pain, lower abdominal cold, cold pain in the waist, stomach cold stomach pain; long-term wear can burn excess body fat to achieve a certain weight loss effect.

The following YOULUMI infrared light physiotherapy belt is ideal for the above conditions, effectively reducing inflammation and pain, having improved blood circulation, promoting tissue repair and regeneration, eliminating swelling, and accelerating wound healing.Beautiful appearance, excellent performance, four types for your choice!

001:40W 350 PCS(SMD 5050 3chips in One LED Chip)

002:28W 160 PCS(SMD 5050 3chips in One LED Chip)

003:25W 180 PCS(SMD 5050 3chips in One LED Chip)

004:12W 80 PCS(SMD 5050 3chips in One LED Chip)

Each LED diode has three chips inside, one 660nm and two 850nm. the fabric is soft, comfortable and breathable!It also has an outstanding feature that it can be used not only on people, but also on pets, especially horses with lumbar and abdominal areas and joints that are prone to injury.And this infrared light physical therapy belt also passed FDA approval, is a very good choice!

Read More

6 Red Light Therapy Benefits


In the early 1990s, NASA found that red light could activate plant growth in space in the absence of sunlight.

The red light was then studied for its ability to increase energy inside human cells. The human body needs to make ATP (Adenosine Triphosphate) and cellular energy to function and survive. This occurs naturally when our bodies are exposed to natural sunlight.

Most people don’t get nearly enough sunlight; the average American spends over 90% of their time indoors, surrounded by bright artificial light.

Red and near-infrared wavelengths of natural light stimulate the mitochondria in our cells. The mitochondria turn the light into usable energy for our bodies through the process of cellular respiration.

Red light therapy may be beneficial because it boosts the production of ATP which may enhance healing.

Because it can also reduce inflammation, it may help conditions like arthritis and acne. 

Red light may also help decrease signs of aging by replenishing the collagen in your skin.

Perhaps you’ve heard celebrities raving about the benefits of red light, or seen advertisements on Instagram for expensive red-light emitting devices. 

Red light therapy is a treatment that uses LED lights or lasers to expose the body to red light, the longest wavelength of visible light on the visible light spectrum. It’s sometimes referred to as RLT, photobiomodulation therapy, or low-level laser light therapy.

Some research suggests that exposing yourself to red light for 5 to 20 minutes may increase the production of adenosine triphosphate (ATP,) a compound that stores and provides energy to your cells. 

That increase in cellular energy can be beneficial when it comes to repairing skin damage and wound healing, says Laura Buford, MD, a dermatologist at Westlake Dermatology & Cosmetic Surgery.

“While more research is needed to understand the full benefits and mechanisms of red light therapy beds, there is evidence to suggest it may be beneficial in improving certain skin conditions including acne, aging, hair loss, wound care, and sun damage,” Buford says. 

Here are six potential red light therapy benefits

1. Reduce inflammation 

Inflammation is a process that helps your body fight infection and heal — but chronic inflammation that lingers in the body is linked to a range of disorders including: 

  • Diabetes
  • Heart disease 
  • Cancer
  • Depression
  • Bowel diseases

In animal studies, best red light therapy has been shown to reduce inflammation by decreasing levels of inflammation-causing molecules called pro-inflammatory cytokines. 

2.Improve acne

Light-based and laser therapies are often used to treat acne because the light can penetrate deep within the skin. 

Red light therapy for home targets your sebaceous glands — small ducts that release a pore-clogging, acne-causing oil called sebum. The effect of the light helps reduce inflammation within those sebaceous glands, which may improve the appearance of acne.

Some research suggests that red light appears to be most effective as an acne treatment when used with a type of drug called a photosensitizing agent — particularly among patients whose acne doesn’t respond to topical therapy or oral antibiotics. One over-the-counter photosynthesizing agent is alpha-lipoic acid (ALA).

You should know that photodynamic therapy can make you more sensitive to light for as long as three months post-procedure. Other possible side effects include:

  • Swelling at the area of skin treated
  • Skin discoloration
  • Scales crusts or blisters
  • Itching or burning
  • Skin infections

3.Decrease signs of aging

Your skin is largely made of collagen, a protein that prevents it from sagging and keeps it looking and feeling plump. While collagen is naturally produced by the body, sun exposure, smoking, pollution exposure, and aging decrease production causing skin to lose elasticity and appear to sag and wrinkle.

2014 study found full-body exposure to red light over the course of 30, twice-a-week sessions increased collagen density on participants’ faces and caused visible improvements in wrinkles and skin roughness. 

4. Reduce pain from arthritis

Red light therapy devices could help reduce pain from a couple types of arthritis: 

Osteoarthritis: a degenerative disease that affects the fingers, knees, and hips. 

Rheumatoid arthritis: an autoimmune condition causing inflamed joints. 

Recent human studies are limited. One small study from 1992 found that red light therapy led to a more than 50% reduction in arthritis pain from patients with degenerative osteoarthritis in both knees.

A more recent 2013 study in rats found similar results that low-level laser light reduced inflammation in knee joints with osteoarthritis. However, the researchers note that more thorough research is necessary before light therapy can be recommended as a “valid therapy.”

5.Promote wound healing

While research on adult humans is limited, animal and in-vitro studies suggest red light can accelerate the healing process of cutaneous wounds. 

Studies have found treating wounds with red LED light:

  • Reduction in inflammatory cells
  • Increased fibroblasts (connective tissue cells that produce collagen and fibers) 
  • Collagen synthesis 
  • Angiogenesis (new blood vessel formation) and tissue formation 

All of the above are involved in the wound healing process. 

6. Boost hair growth 

Androgenetic alopecia, a genetic condition that causes hair loss, is the most frequent cause of hair loss in both males and females, affecting an estimated 80 million people in the United States. 

small 2013 study found that best red light therapy using red light significantly improved hair counts in males with androgenetic alopecia. In the study, participants were treated every other day for 16 weeks, for a total of 60, 25-minute long sessions. 

Insider takeaway

Red light therapy devices is a treatment involving exposing the body to red light using LED lamps or lasers. While some of the data on red light appears promising, more studies are needed to determine exactly how red light therapy for home works, and how it can most benefit patients. 

“Results vary from patient to patient and are typically subtle after one session,” Buford says. “More research is needed to further characterize the benefits of red light therapy beds , but it appears to be a promising treatment in the field of dermatology.”

This process, known as Photobiomodulation, has been extensively researched for many years. It adds measurable energy to the mitochondria of your cells, leading to a number of wellness benefits.

Read More

Solar street lights need to be tested for what performance

Solar street lamps will do a lot of tests before the design and production, to test whether their performance meets the national quality requirements and standards, whether it meets the basic specifications and safety standards of solar street lamps, etc., the quality inspection before delivery is more strict and rigorous. Solar street lamps generally need to test the following performance.

1. Photoelectric performance test

The test can effectively detect whether the actual parameters of the solar street lamp have the problem of virtual mark. The luminous efficiency, color temperature, color difference, input and output power, and whether the current and voltage are stable can be detected by the test.

2. Quality of core light source of solar street lamp

The quality of solar street lamp LED light source needs to test the lens process evaluation, packaging glue type, whether there are pollutants, bubbles, air tightness evaluation, chip process evaluation, chip graphics and microstructure measurement, defect search, chip pollutants identification, whether there is leakage, whether there is damage.

 Lead bonding process evaluation, welding morphology observation, arc height measurement, diameter measurement, lead composition identification, etc.

3. Heat dissipation performance of lamps

The integrated solar street lamp is a whole set of batteries, controllers, and LED light sources in one, with good tightness, so heat dissipation should be taken into account when working discharge. As a new type of energy-saving lamp, only 30-40% of the electric energy is converted into light in the lighting process, and the rest is converted into heat energy.

 And the life and quality of the lamp are closely related to the temperature, LED lamp temperature, shell temperature, and heat dissipation temperature will be related to the uniformity of the degree of illumination and quality of life.

Solar street lights need to be tested for performance

4, waterproof and dustproof performance of lamps

Solar street lamps have certain protection level standards, which are generally represented by IP plus numbers. Solar street lamps are usually IP65, IP66, IP67, and must at least reach IP65 waterproof and dustproof level. IP67 level is the highest level of solar street lamps at present.

5. Quality evaluation of solar street lamp power supply

The function of the drive power is to convert the AC mains into a suitable direct current. Reliability, efficiency, power, driving mode, overcharge protection, over-discharge protection, overvoltage protection, temperature negative feedback protection, and other factors should be considered in the selection and design of a driving power supply.

6. Appearance inspection of solar street lamp

Appearance check, size check, material check, assembly check.

7, solar street lamp wind resistance

Solar street lamp is a key factor of the wind resistance of the lamp pole test, because the lamp pole is a certain height, the lamp pole from the material or size ratio should be measured in accordance with the basic data wind resistance coefficient, the general solar street lamp selection is a ten grade typhoon resistance coefficient. 

Especially in the coastal typhoon zone and the northwest area with large windblown sand, the wind-resistant design and wind-resistant ability of solar street lamps must be considered.

8, solar lighting lightning protection design performance

Solar street lighting in summer thunderstorm weather, especially pay attention to lightning protection, solar street lighting products themselves are low voltage, equivalent to its own lightning rod, low pole light is very unlikely to be struck by lightning, but high pole light or to consider and test lightning protection performance.

9. Continuous rain and light duration test

Solar street lamps in use process are the main concern of the rainy day not bright lights or light time is short, to reach the desired ideal effect, so the factory in production of the factory will test before the morning light rainy time length, according to the test data, according to different regions and climate differences, setting and debugging days duration rainy daylight lamp solar street lamps, generally 3 to 5 days, Configure high Settings for 5-7 days.

Solar street lamps after the above performance test leave the factory safely, not only to ensure product quality, and manufacturer reputation, but also to ensure the safety and rights, and interests of consumers, to avoid return and exchange, reduce the cost and expenditure of after-sales service.

Read More

Red Light Therapy Devices at Your Fingertips

Red light therapy for weight loss is a great type of light therapy treatment that can help with many health concerns from skin conditions. It was originally developed by NASA to help grow plants effectively in space. Then it changed to becoming a therapeutic option that you can use to help make your life better. Today, there are even red light therapy devices that you can use at home any time that you want.

Many people who are considering whether to use red light therapy or not wonder how long they will need to be under the light and how long they need to use the treatment to see and maintain their results. Let’s take a look at how to answer this to help you see how great red light therapy can be.

What is Red Light Therapy

Full body red light therapy is basically a treatment that you can use that relies on red color wavelengths. These wavelengths are able to penetrate the upper layer of the skin, providing it with energy and the ability to heal the skin.

Red light therapy for skin promotes collagen growth and the reduction of wrinkles. The treatment is safe and effective, without harmful side effects, making it the perfect option to choose.

best at home red light therapy

The Good Light

Electromagnetic radiation is characterized by its wavelength (or frequency) and its intensity. When the wavelength is within the visible spectrum (the range of wavelengths humans can perceive, approximately from 390 nm to 700 nm), it is known as “visible light”.

Red light emits wavelengths between 620-700 nm. Red and infrared light that falls within the wavelength range of 650-850 nm, is extremely beneficial and is regarded as deep red light therapy. These wavelengths of light are bioactive in humans and affect the function of our cells.

Based on animal and insect studies scientists determine that red light at 670 nm may improve retinal sensitivity and color vision. Red light therapy achieves this outcome by improving the photoreceptor’s mitochondrial performance. Some studies suggest that a specific part of the spectrum, such as red light, thickens the choroid and might ultimately prevent myopia.

However, this has not yet been tested in children. How does this work? Some scientists think red light recharges the cell’s powerhouse or “battery,” known as the mitochondria. During a  deep red light therapy treatment, chromophores within our cellular mitochondria absorb red and infrared light photons and convert them into energy. Mitochondria are the powerhouses of cells, responsible for making adenosine triphosphate (ATP), the cell’s form of energy, and enhancing the consumption of oxygen.

Infrared Light Radiation

Infrared radiation (IR), or infrared light, is a type of radiant energy that’s invisible to human eyes but that we can feel as heat. All objects in the universe emit some level of IR radiation. Infrared radiation is divided into the following three bands: IR‐A (near-infrared): 760 and 1,400 nm‐B (mid-infrared): 1,400 and 3,000 nm‐C (far-infrared): 3,000 nm and 1 mm

medical-grade red light therapy

Clinical research shows red light therapy reduces fat and helps with weight management. Red light therapy’s positive effects on fat and cellulite loss, obesity control, and cosmetic body enhancement have been seen in numerous clinical trials in recent years. 

And unlike many solutions promoted for weight loss, such as medications and surgery, red and near-infrared light therapy is a safe, natural, and noninvasive option for becoming healthier and more fit.

Since this is natural light without any UV attached, red light therapy for skin is completely safe and will not cause damage. Right now it is most commonly used to help with a variety of skin conditions, though there is growing research to see whether this type of full-body red light therapy can be used to treat other issues like inflammation, help with weight loss, and more.

How Often Should I Do Red Light Therapy Panel?

Once you have found the right specialist to help with your red light therapy devices, it is time to decide how often, and for how long, you should use the red light therapy panel.

One recent study that was done to see how effective this therapy is on wrinkles, fine lines, and skin texture found that doing deep red light therapy for half an hour two times a week provided positive results and good satisfaction from the users.

The good news is that this type of light therapy is proven safe and doesn’t have any negative side effects. You don’t even need to worry about any downtime when the treatment is done. This allows you to experiment a bit to see what seems to work the best for you without causing any damage.

A good place to start is to do three to five sessions a week for up to a month to start getting the results that you want. After that first month, you can then reduce the number of times, usually, two or three is fine, for another 12 weeks.

You will need to keep using the light therapy for the long term if you would like to keep those results. You can reduce it to just a few times a week and still see this work. It is even possible to use light therapy a few times on the same day.

Then you need to consider how long you should do each session. This will really depend on what you are using the red light for. The best thing to consider is the energy units of the red light therapy panel you have, or the joules, rather than the clock. So, if you are doing a session to get some more brain benefits, you need to go for a few thousand joules for each session. You can go until you get that much out of it and you are set to go.

If you are worried about getting the right amount of time and doing the therapy for a long enough time, you can always work with a specialist to make this a little bit easier. They can set up the sessions and the intensity to help you see all the results that you want, without you having to put in the work or worry about it at all.

How Much Do Red LED Light Therapy Treatments Cost?

Red light therapy cost varies, but you know the saying, “you get what you pay for,” so don’t simply go with the least expensive device. While there is a range of red light therapy costs, do your homework. When investing in a quality device, remember that not all devices are created equally. Select an FDA-cleared option to ensure the efficacy, safety and results of professional-grade equipment.

If red light therapy cost is of particular concern for you, it’s important to remember that you are investing in your own health (if using at home) or the health of your clients if you are a professional user investing in your business.

Read More

YOULUMI all-in-one solar street light

YOULUMI all-in-one solar street light is a small solar power generation system that uses solar panels to supply power, stores electrical energy in lithium batteries, and supplies the lithium battery’s electrical energy to LED lights at night. 

The power supply system of this H series 40W, 60W, 80W, and 100W all-in-one solar street light is mainly composed of solar panels, lithium batteries, photovoltaic controllers, lamps, LED modules, and other patented accessories. The biggest advantage of this light is that its solar panel, battery, and LED light source are integrated, which can effectively prevent the battery from being stolen.

This range of all-in-one solar street lights is easy to install on poles and looks great on both main streets and country roads. Our special design is to put the battery box outside the lamp body, which is very convenient for after-sales maintenance if needed later. 

YOULUMI’s H series housing is made of special aluminum and iron materials. The holes in the lid are not only good-looking but also help with heat dissipation. The whole lamp has an elegant design, strong technical support, and excellent performance.

H series All-in-one LED solar street lights, also known as all-in-one solar street lights, are equipped with human PIR sensors, no one is nearby, the solar street lights will only maintain 30% brightness, and when someone walks under the street lights, the solar street lights will change. 

100% brightness, the sensor saves electricity to the maximum extent, it is very suitable for use in mountainous areas with less traffic, and the lamp has a light control function, which automatically turns on the lights at dusk and automatically turns off the lights at dawn, which is very intelligent.

We bet you have some questions. Want to know more about Solar Lighting International’s Stealth “All-in-One Solar” Lighting Solution Package?

We have the answer!


Our invisible solar lighting systems include a compact, high-efficiency monocrystalline solar panel, MPPT (Maximum Power Point Tracking) charge controller, >165 lumens per watt tunable LED modules, a long-life LiFePO4 battery, a 15m (50 ft) PIR motion sensor and timer.


Why monocrystalline solar panels? By choosing monocrystalline solar modules, Solar Lighting International knows it will generate more energy, work better at high temperatures and last longer than polycrystalline panels. We build these products for our end users – you want a budget-friendly product that will last and that’s what we deliver.


What is “>165 lumens per watt”? Why does it matter? Because we produce more light, using less energy than our competitors.


4000 lumens – this is our entry-level unit.

6000, and 8000 lumens are our medium picks when you need an extra amount of light.

10,000 lumens is for customers who need the best. A light designed for a large area or multi-lane roads,

Remember watts don’t matter – lumens matter! Lumens tell you how much light a light fixture can emit, watts only tell you how much electricity it consumes. The higher the lumen/watt ratio, the better and brighter you can expect from a system.

Read More

Advantages of LED Lighting

How do led lights work?LED (light emitting diode) is a kind of solid-state semiconductor device that can convert electric energy into visible light, which can directly convert electricity into light.LED can directly emit red, yellow, blue, green, green, orange, purple, and white light.

LED light source has the advantages of low-voltage power supply, low energy consumption, strong applicability, high stability, short response time, no pollution to the environment, multi-color luminescence, and so on.

Although the price is higher than the existing lighting equipment, it is still considered that it will inevitably replace the existing lighting devices.LED lights include working lights; led corn lights; led retrofit kits; dock lights; balloon lights …What are the advantages of LED lights? Here are some of the most advantages:

1,Energy Conservation:

One of the main advantages of LED lamps is that they produce higher lumens per watt than incandescent lamps and fluorescent tubes or bulbs. This means that they can produce the same amount of light at a lower energy input.Because of their high lumen output per watt, LEDs are capable of turning about 70% of their energy into light. 

This makes them much more efficient than other bulbs, which waste a lot of energy by turning it into heat. LED is made of semiconductor materials to produce light-emitting diode, which directly converts electrical energy into light energy.

The basic working principle of the energy-saving lamp is the same as that of the fluorescent lamp. The ballast is changed into an electronic one and integrated with the lamp tube. Although it saves electricity than incandescent lamp, its conversion efficiency is lower than that of LED.

The energy consumption of white LED is only 1 / 10 of incandescent lamp and 1 / 4 of energy saving lamp.Generally, the luminous efficiency of Halogen Bulb is 15-20 lumens / watt; the luminous efficiency of Incandescent Light Bulb is 12-24 lumens / watt; the luminous efficiency of CFL bulbs is about 65 lumens / watt;now the luminous efficiency of LED Light Bulb is 100-155 lumens / watt. 

For example, to produce 500 lumens, a typical incandescent lamp needs 50 watts, while a fluorescent or energy-saving lamp requires 20 watts. However, led corn light or led retrofit kits take only 5 watts to produce 775 lumens. This advantage translates into cost savings in electricity charges.

2,Long Lifetime :

One of the biggest advantages of LED lights is long service life.LED lamp has a longer service life, up to 50000-100000 hours.. The life of LED lamp is determined by the light attenuation. Generally speaking, the longer the time is used, the greater the light attenuation, the dimmer the brightness of the lamp will be, until it finally does not light up and can not work normally. 

There are two reasons for the light failure, one is the light failure of blue LED itself, the other is the light failure of phosphor. Different LED lamps have different light attenuation.How do led lights work? The light-emitting mechanism of light-emitting diode is determined by the special structure of the diode.  Its special light-emitting mechanism determines that the light-emitting lifetime is as long as 50000-100000 hours.

The components of an LED and the way that they generate light significantly extend the lifespan of these bulbs. Where other bulbs’ lifespans are shortened through both proper and improper usage, the LED bulb’s low heat levels, durability, and energy efficiency make it possible for it to outlast other types of bulbs by thousands of hours.

Typically, the important parts of a light bulb, such as the filament, weaken over time, which causes the bulb to burn out. But LEDs don’t burn out the same way that other bulbs do; instead, the amount of light they produce decreases gradually in what is called “lumen depreciation”. 

The lifetime of an LED bulb is based on how long it takes for the lumen output of the bulb to decrease to 30%, so it will likely last longer than the average rated lifetime hour listed on the box if you don’t mind or don’t notice the decreased illumination.

3,Environment protection

It is becoming increasingly important for companies to become eco-friendly. Customers increasingly want environmentally friendly options and using an environmentally friendly light source can help companies reduce their energy use, as well as attract a socially conscious consumer base.

Compared with the traditional light source, LED has better environmental protection benefits. There is no ultraviolet and infrared in the spectrum. The waste can be recycled, pollution-free and mercury free. It can be safely touched. It is a typical green lighting source.

LED lamps do not use high-risk mercury like fluorescent lamps, and there will be no public hazards such as mercury ions and phosphors that may leak during the manufacturing process or after the bulb is damaged. The epoxy resin used for manufacturing LED belongs to organic polymer compound. 

After curing, it has good physical and chemical properties. It has high bonding strength to wafer and metal, hard and flexible, stable to saline alkali and most solvents, and is not easy to be damaged. Even if it is damaged or aged, it can be recycled and reused without causing pollution to the environment. 

For the particle layout of ED lamps and displays, the light produced is generally scattered, and little light pollution is produced. Led working voltage is low, DC drive mode is adopted, ultra-low power consumption (single tube 0.03 ~ 0.06w), photoelectric power conversion is close to 100%, under the same lighting effect, more than 80% energy saving than traditional light source.

4,Widely Used:

LEDs offer a wider spectrum of correlated color temperatures (CCT) ranging from 1,000K to 10,000K as per the figure below while incandescent lighting generally ranges between 2,000K and 6,000K. You can read the youlumi lighting guide.

The CCT dictates the color of the light emitted with higher CCT values giving a brighter, cooler light. Lower CCT values are associated with a warmer, more yellow light. Therefore, depending on the desired use and application, it may be easier to find a perfect fit in an LED product lineup than an incandescent. Like working lights or dock lights normally make 5000K, balloon lights could be 6000K.

Youlumi lighting guide

Application directions include:

Building exterior lighting: The LED light source is small and thin. The research and development of linear projection lamps undoubtedly become a highlight of LED projection lamps, because many buildings do not have a place to place traditional projection lamps. It is easy to install, can be installed in horizontal or vertical direction, better combined with the surface of the building, expanding the creative space.

Landscape lighting: unlike traditional lamps and lanterns, LED light source is mostly glass bubble shell. It can be organically combined with urban street furniture, and can be used for lighting in urban leisure space such as path, stairs, deck, waterfront and gardening.  

How do led lights work

Signs and indicative lighting: for example, road surface separation display, stair step local lighting, emergency exit indication lighting, led self luminous underground lamp with appropriate surface brightness or lamps embedded in vertical wall, ground guide light in theater auditorium or indicator light on the side of seat, and guide light on the floor of shopping center, etc.

 Indoor space display lighting: LED light source can be used as a substitute for optical fiber lighting in museum. Commercial lighting mostly uses color LED, indoor decorative white LED combined with interior decoration provides auxiliary lighting, hidden light band can use LED, especially for low space.

Entertainment places and stage lighting: due to the dynamic and digital control of LED color, brightness and dimming, the lively saturated color can create static and dynamic lighting effects. From white light to any color in the full spectrum, the use of LED opens a new way of thinking in this kind of space lighting.

Video screen: full color LED display screen is the most eye-catching outdoor large-scale display device in the world. It adopts advanced digital video processing technology, and has incomparable large area and ultra-high brightness. 

In addition, the LED lights installed on the screen can also adopt various specifications of luminous pixels according to different indoor and outdoor environments to achieve different brightness, color and resolution to meet various purposes.

Vehicle indicator lighting: used for LED navigation information display of vehicle road traffic. In urban traffic, highway and other fields, led as a variable indicator and lighting function.

Read More

How Red Light Therapy Can Support Detoxification

The body’s aptitude to detoxify is crucial to overall health and is contingent on the functioning of several organs and tissues. It can be challenging to find techniques that support and enhance detoxification.

Health can suffer degradation from a variety of sources, including pollution, free radicals, UV damage, chemical exposures and cosmetics. Making sure the detoxification pathways are supported and working as they should, may help lessen the harm these toxins can cause.

The skin plays a significant role in detoxification. According to research, red light therapy can directly support the skin to detoxify more effectively.

What is Red Light Therapy?

Red light therapy is a type of phototherapy that uses low-level red and NIR light to treat various health conditions and promote healing. Unlike other forms of light therapy, red light therapy does not use ultraviolet (UV) rays. Instead.

It uses specific wavelengths of red light to penetrate the skin and alongside with spurring the release of nitric oxide in the mitochondria, optimizing cellular ATP and heightening the production of collagen and elastin.

Red light therapy typically uses a wavelength of 660 nm, which falls into the infrared spectrum. It is generally believed that infrared energy helps to heal the body by relaxing muscles, boosting circulation and aiding in skin rejuvenation. In addition, red light therapy has been shown to boost the immune system, increase energy levels, and improve sleep.

How Effective is Red Light Therapy?

Adenosine triphosphate (ATP), a chemical element, is required by all living things in order to provide the cellular energy necessary for life. Our bodies need natural sunlight to help produce this component. The majority of the time, this function is carried out by the red-infrared spectrum of natural sunshine and does this by stimulating our cells’ mitochondria.

By using red light therapy, you are essentially enabling your body to produce more ATP and operate at a higher level of efficiency. The fact that it operates at the cellular level offers a vast array of potential advantages.

How does red light therapy affect the body

How Can Red Light Therapy Support Detoxification

There are many parts of the body that are involved in the overall stress defense system. This is known as the NeuroEndoMetabolic (NEM) Stress Response. It plays a crucial role in eliminating toxins from your body and is mostly controlled by the Hypothalamic-Pituitary-Adrenal (HPA) axis. It works in tandem with your detoxification pathways and coordinates various organs and systems to maintain the internal balance required for good health.

To remove toxins from the body, the detoxification system and its organ systems, such as the skin, enter the picture. Red light therapy has the potential to optimally support and strengthen the autonomic function of detoxification.

However, the detoxification system can occasionally become sluggish. A range of symptoms that could eventually become incapacitating may manifest when this occurs.

Among the various symptoms of a detox malfunction are the following:

  • Anxiety
  • Brain fog
  • Inflammation
  • Fatigue
  • Weight gain
  • Insomnia
  • Skin issues such as acne and psoriasis to name a few

Support Detoxification Naturally with Red and NIR Light Therapy

Red light therapy, particularly operates on the top layers of the skin and has the power to boost and encourage detoxification through the skin, blood, and lymphatic system. The targeted areas may experience increased blood flow which can enable some toxins to pass through the skin.

By combining the synthesized light energy with nutrients from a well-balanced diet, exercise and other wellness practices such as adequate sleep, and lymphatic drainage,  the body’s detoxification pathways are positively supported.

It is no secret that sleep is vital when it comes to the body naturally detoxifying.  The brain can legitimately be cleansed after a good night of rest. Researchers originally demonstrated in mice that the space between brain cells might widen during sleep, enabling the brain to clear toxins that accumulate during awake hours. These findings point to a novel function for sleep in health. Read more about how to optimize sleep with red light therapy, as covered in this article.

Red light treatment has been demonstrated in studies to lengthen and improve the quality of sleep through helping increase melatonin production.

It’s interesting to note that red and infrared light therapy has been found to boost “melatonin production “extra-pineal,” or outside the pineal gland. Melatonin plays crucial roles in protecting the mitochondria from harm and supporting glutathione levels, which is one of our body’s most potent and significant antioxidants and detoxifying substances. 

Contrary to what most people believe, melatonin is much more than just a hormone that induces sleep. Red/NIR light effects may be significantly influenced by this elevated melatonin, according to some researchers.”

A Few Tips on How to Use Red Light Therapy Panels When Detoxifying:

  • Start with a short session. If you’re new to red light therapy, start with a shorter session of about 5-10 minutes. This will give your body time to adjust to the therapy.
  • Increase the duration of your sessions gradually. Once your body has adjusted to red light therapy, you can start increasing the duration of your sessions.
  • Use it regularly. For best results, aim to use red light therapy 3-5 times per week. This will help your body consistently eliminate toxins and improve overall health.
  • Combine with other detox methods. For an even more thorough detox, combine red light therapy with other detox methods such as saunas or dry brushing.

If you are looking for a way to improve your health and well-being and support natural detoxification, this might be something worth exploring. Red light therapy has a wide range of benefits and is relatively affordable, making it an accessible option for many people.

The evidence of red light therapy’s potential to enhance the body’s detoxification abilities is clear to see! Always talk to your doctor before beginning any detox protocol. It is also encouraged to take into account your body’s existing capacity for detoxification. 

Due to the fact that the body is delicate, some may not be able to withstand some forms of detoxification. Furthermore, maintaining the body’s general health and tolerance for detoxification is crucial for long-term overall health.

Our collection of Youlumi panels will provide you with a range of options for adding to any wellness regime. Shop light therapy panels today! 

red light therapy for home

Youlumi’s Solar Street Light

Solar street lights are very popular these days as more and more people understand the benefits of solar street lights. Not only are solar street lights better than traditional lighting solutions, but they can also save you a lot of money in the long run because they don’t increase your electricity bills.

Solar Street Light

Buyer's Guide for Solar Street Lights

Before you decide to buy, be sure to check some basic things, such as:

Lighting: Well, it doesn’t make sense to buy a light if it’s not bright enough, right? Having said that, you should always check the number of LEDs in the light, and the brightness level usually mentioned in lumens.

Waterproof rating: Since street lights are installed outdoors, they need to be strong enough to withstand harsh weather conditions such as storms. To ensure this, please make sure that the solar light you buy has a waterproof or dustproof rating such as IP65, IP67, etc.

Battery Life: Solar street lights do not require any electrical connection to work as they draw their power from a built-in solar rechargeable battery. Therefore, the larger the battery capacity, the longer the lamp will work. You can check the battery capacity (in mAh) and make sure it lasts at least 6-8 hours to provide all night lighting.

Like these few factors, there are many other very important things that every new buyer should consider.

Solar Street Light

Are solar street lights worth the money?

We’re all a little nervous about making financial decisions that could bring good news or bad luck. If you’re looking to save money on solar street lights, we know how you feel. Street lighting isn’t easy on the wallet, so if you make the wrong decision about lighting, it can have lasting financial consequences. 

Some people are a little nervous about switching to solar lighting simply because it has a higher upfront cost. We’ve heard a lot of similar talk about the price of solar lighting. However, we’re here to let you know that solar street lights are worth the price because they can save businesses and cities thousands of dollars in upfront costs and time.

How are solar street lights worth the money?

We will be transparent – on average, buying a solar light in advance will cost you around $1000. The money is used for additional components such as solar panels, solar cells, electrical management components and other components.

However, the savings mainly come from three factors:

You save on energy bills (you no longer have to pay for them)

Inexpensive, durable LED bulbs

Save on trenching, wiring and other hidden costs

How much?

It depends on the nature of the project. Typically, solar lighting projects save about 20% on the original price of traditional lighting. Save even more on some past projects, sometimes as much as 45% off the original price.

If you would like to convert your street lighting to solar, please contact us and our solar experts can quote you and see how much you can save. Or, if you want to learn more about how solar lighting works, feel free to download our Solar Lighting PDF with tons of new information.

Read More

Easy Guide To Red Light Therapy At Home For Skin Benefits

If you are experiencing skin issues then Red Light Therapy could be for you.

Red Light Therapy boasts endless benefits for the skin. But getting regular treatments can end up being expensive.

If you’re interested in learning the benefits of Red Light Therapy, and how to do it at home.

Here is our guide which helps you to get the skin benefits of Red Light Therapy whilst keeping long-term costs down.

Does Red Light Therapy Improve Skin?

Clinical research shows that Red Light Therapy significantly improves collagen production, fine lines, wrinkles, skin complexion, skin tone, and smoothness.

The findings of the LED light therapy study found that three weekly sessions for a year significantly improved unwanted skin issues that are common from sun damage and premature aging.

It was noted that Red LED Light Therapy can be effectively used for facial and body skin rejuvenation and restoration.

Participants reported satisfaction with the results, and improved skin health, complexion and feeling.

The research shows that Red LED Light Therapy is a great way to get results. However, going to a local spa to receive treatment can end up being costly.

Investing in a Red Light Therapy Panel is a great way to keep long-term costs down.

In comparison – the money you invest results in a product that you own for a lifetime.

You can enjoy as many sessions as you wish. And share the therapeutic benefits with friends and family!

Rather than going to a spa, it makes financial sense to invest in a panel for the lifetime benefits of LED Light Therapy, and flexibility in use.

Is Red Light Therapy At Home Effective?

Infrared Light Therapy at home is just as effective as going to a salon or spa which has a Red Light Therapy Panel.

The beauty of LED Light Therapy is that it is a non-invasive skin procedure. This means the treatment is painless and super easy to do at home.

If you want to learn more about the science of how Red and Infrared Light Therapy works on the skin, you can check out our blog post on The Incredible Benefits Of Red & Infrared Light Therapy here.

The benefit of doing your LED Light Therapy at home is that you’re able to easily fit the treatment into your own schedule without having to go anywhere or make an appointment. And you can set your own environment.

red light therapy panel

You don’t have to pay for timed sessions, and can use the Red Light Therapy Power Panel as much or as little as you want without potentially wasting money from an unused booked session or minutes.

You can create your own home spa ritual with your LED Light Therapy. Put on some aromatherapy and a spa playlist. And enjoy Red Light Therapy in the comfort of your own home.

There is no downtime needed for Red Light Therapy – which means it won’t interrupt your day, or make your skin red or blotchy.

You can do your session, and go to work or see your friends immediately – without them knowing your youthful secret!

Home Red Light Therapy Benefits:

  • Invest your money into a product for lifetime independent use
  • Flexibility around using times and session lengths
  • Home use (no travel times or extra travel expenses)
  • Personal tailoring of environment and comfort
  • No limit on the number of people that can use the Red Light Therapy PowerPanel (financial savings)

How To Use Red Light Therapy At Home On Your Face

  • It’s super simple to use a Red Light Therapy Device at home because the treatment is non-invasive.

Tips For Using Red Light Therapy At Home


  • Take before pictures so that you can observe the results as your skin improves over time.
  • Make a schedule or pick a suitable time for your therapy so that you don’t forget to do it.
  • Pamper yourself with some candles, spa music, and aromatherapy.
  • LED lights don’t contain UVA or UVB rays, but it is still a good recommendation to protect your eyes with protective eyewear when using your Red Light Therapy Device.
  • Try a 10-20 minute session 3 times a week, and move up to 5 sessions a week if you have time.
  • Sit somewhere comfortable where you can relax whilst you enjoy your LED Light Therapy.

How Often Should You Use Red Light Therapy On Your Face?

Mini Red Light Panel

One clinical study found that using your Red Light Therapy Device three times a week for a duration of 20-minutes can show results in as little as three weeks.

The more you use your LED Light Therapy Panel, the quicker you will see results.

Start with three a week, and more up to five times a week if your schedule allows.

The most important part is to be consistent to see results. So you really want to ensure you are doing your Red Light Therapy at three twice a week, every week.

Benefits Of Red Light Therapy

Clinical research by Dermatologists found that Red Light Therapy has multiple beneficial uses.

Dermatologists note that Red Light Therapy is a safe treatment for a variety of medical and aesthetic skin issues and conditions that are usually problematic and hard to treat.

They found that the average lesion count was reduced by 46% four weeks post-treatment. And by 81% at 12 weeks post-treatment. The wound healing and inflammation results found that the skin healed twice as quickly when an LED light therapy device was used.

Red Light Therapy is now widely used in medical and cosmetic cases.

A light therapy device can be effective pain relief for inflamed and irritated skin problems.

How Does Red Light Therapy Work On The Skin?

There are different wavelengths of light that can be separated into those we can see, and those we can’t.

UVA and UVB rays and infrared light wavelengths are invisible to the human eye. Whereas light wavelengths visible to the human eye are found in all different colors.

There are different wavelengths of light on the visible light spectrum. The wavelengths penetrate the skin (dermis) to different depths and correspond to different colors of LED light.

The red light wavelength found in red light LED therapy penetrates the skin (dermis) and works on fibroblasts, and improves cellular function. Fibroblasts are cells that are found in connective tissue.

If you’re looking to keep your skin rejuvenated, healthy, and radiant – then taking care of fibroblast cells is important!

Fibroblasts contribute to wound healing, but they also produce collagen proteins.

Collagen protein is vital for skin elasticity and makes up for three-quarters of your skin’s structure.


The clinical results support both the medical and aesthetic benefits of Red Light Therapy treatment. This is a beautiful non-invasive way to treat a multitude of skin problems and skin inflammation.

If you wish to start your journey to healthy and glowing skin – you can invest in your very own Red Light Therapy Device here.

red light panel

Our Red Light Therapy Panel comes in several different sizes to suit your treatment area needs. And we also stock a portable travel option so you don’t have to miss an LED light treatment when you will be on the road.

Our Red Light Therapy Panels are flicker-free and come equipped with adjustable automatic timing settings.

You’ll also find our panels come with a stand. Which ensures you can sit comfortably for even coverage and treatment of the desired area.

LED Therapy panel

There are also optimized with the most effective and research wavelengths to ensure you see the best results!

Begin your journey to fresh and rejuvenated skin today!

Read More

Why Red Light Therapy is One of the Best Healing Tools

Benifits of red light therapy

Red light therapy, also known as photobiomodulation or LED light therapy, is considered a safe, painless, non-invasive, and drug-free form of treatment for healing the skin and body.

Red light can penetrate the body 8-10 millimeters into the skin — reaching deep into tissues, muscles, and bone.

Many studies indicate that red light therapy has numerous potential health benefits, including but not limited to: improved mitochondrial function, improved blood circulation, muscle recovery, and collagen production, as well as decreased pain and radiant skin.

Red Light therapy also has anti-inflammatory effects that may help heal a wide range of issues from the surface of the skin all the way down to the bone.

LED red light therapy products to use a patent-pending combination of light within the 625nm – 900nm range, which are the most effective for healing wounds and various skin conditions.

How does red light therapy devices work?

Red light is bioactive and can have profound effects on your body by increasing mitochondrial function – the ability to produce cellular energy. The more cellular energy production, the better the body functions as a whole. Red light is especially powerful because it can penetrate 8-10 millimeters into the skin, reaching below the dermis layer and into the subcutaneous fatty layer, which stimulates collagen and elastin production, and accelerates healing. Note that this type of treatment is extremely safe, non-invasive, and drug-free.

What are the benefits of red light therapy devices?

NASA developed led red light therapy for plant growth experiments. Over the years, NASA researchers were able to take this space technology and adapt it for medical applications, such as healing tumors, skin ulcers, serious burns, and oral mucositis.

Astronauts also found a lot of success using red light therapy to reduce pain, accelerate wound healing, and prevent muscle or bone atrophy. There are now over 3,000 peer-reviewed studies that illustrate red light therapy’s seemingly magical ability to heal the skin and body. 

Key Benefits:

  • Enhanced blood circulation
  • Anti-inflammatory effects(3)
  • Increased muscle recovery
  • Increased collagen production
  • Radiant skin
  • Reduces scars, wrinkles, & fine lines
  • Speeds wound healing
  • Enhanced fertility
  • Increased testosterone
  • Decreases pain

Which wavelengths of red light are the most effective?

Resounding research over the past 40+ years has shown that wavelengths between 625nm and 900nm are the most effective for healing wounds and other skin conditions. At the lower end of this spectrum, 630 and 660nm have the greatest efficacy because your mitochondria can absorb these red wavelengths easily. This is also where the absorption of cytochrome c oxidase peaks, which is one of the key mechanisms of red light therapy.

660nm is believed to be the best single wavelength for the stimulation and healing of damaged or abnormal human cell tissue. This is because of its compatibility with cells in the body. Healthy cells emit wavelengths between 600nm and 725nm, on average, whereas unhealthy cells emit a shorter wavelength. 660nm is the midpoint and appears to be closer to the resonant frequency of cell tissue. 

red light therapy for skin

Choosing the Best Red Light Therapy Device

Fortunately, you no longer have to pay for expensive red light therapy device sessions at salons or medical offices; this form of treatment is now accessible for at-home use or on the go. Given the wide variety of red light and near-infrared devices that are on the market, the most important factor to consider is the wavelength of light emitted. In order to reach the mitochondria, you want to make sure that you invest in a red light therapy device that emits light in the 630-660nm range.

Want to take your healing even further? Polychromatic red light therapy device allows you to use multiple wavelengths of light at the same time to heal the body. In addition to 630 and 660nm (red light), devices that also emit 850 (near-infrared) can help you reach deeper into soft tissues, muscles, joints, and bones. 580nm (yellow or amber light therapy) can also be used to specifically target the surface of your skin.   For full skin-to-bone healing, consider using a TrueLight LED light therapy device.

The Science & Benefits Behind Red Light Therapy

According to Ilyas, who practices at Schweiger Dermatology Group in Pennsylvania, data shows that red light therapy can penetrate the skin deeply up to 6 millimeters.

Red light therapy treats acne, wound healing, hair regrowth, and anti-aging, like plumping up fine lines and wrinkles. “It is believed to work by activating signaling pathways between cells. It has not been shown to damage the DNA of cells the way UV light does,” says Ilyas.

Ilyas’ number-one tip is carefully researching options to ensure they fit your lifestyle, budget, and skincare goals. Don’t worry: I carefully vetted every product on this list to bring you only the best red light skin therapy in the game.


The Pennsylvania-based doctor suggests buying a practical and user-friendly red light therapy device, such as a well-fitting face mask, like Ora LED Light Energy Mask and Skin Gym Wrinklit LED Mask. However, Ilyas notes that just because one face mask is popular and fits someone nicely doesn’t mean it’s the perfect fit for your face.

 If you’re concerned a red light skin therapy device won’t accommodate your features, look for a face mask with adjustable straps, such as the Higher Dose Red Light Face Mask and MZ Skin LED 2.0 LightMAX Supercharged LED Mask.


She says three-panel options, like Trophy Skin RejuvaliteMD Red Light Therapy, are simple to use but not ideal if kids run in and out of the room while you’re using it. You can also use a single-panel red light therapy device, including the Celluma PRO, which provides full coverage on your face like a three-panel option, just with a different aesthetic. Regardless of which model you opt for, panel red light therapy machine take up quite a bit of space, so if you live in a tiny studio, you can opt for the third option.

There are a number of benefits of Red Light Therapy machine. Red Light Therapy combines intense red light (650nm) and near-infrared (850nm) wavelengths to offer you optimal color light therapy. Red Light provides the most proven and effective therapeutic wavelengths to the entire body. It reduces oxidative stress and stimulates the production of ATP.

Send The request

Fill in the form below to book a 30 min no-obligation consulting session.

I will reply within 24 hours. Give you a quote as soon as possible