Integrated Solar Street Lamp And Split Solar Street Lamp Structure And Advantages And Disadvantages Comparison!
Integrated solar street lamp and split solar street lamp belong to two different structures, they have their own advantages and disadvantages, in the selection, we must have a full understanding of the structural performance of the two, so as to choose the right type of street lamp according to the needs, the following is the structure and advantages and disadvantages of integrated solar street lamp and split solar street lamp comparison!
Structural comparison between integrated solar street lamp and split solar street lamp:
Integrated solar street lamp is relative to the split solar street lamp. Simply put, the battery, controller and LED light source are concentrated into one, made into a lamp head, and then configured with panels, lamp poles or arm installation. It is characterized by convenient installation, can be said to be a fool installation, will screw will be installed, removed from the traditional split solar street need to install the panel bracket, install the lamp head, make the battery pit and other steps, greatly saving labor costs and construction costs.
In terms of performance, integrated solar street lamps have been upgraded in terms of design performance, such as batteries. Now most street lamp batteries are installed with lithium batteries, which are much higher than traditional street lamp batteries in terms of performance.
Integrated solar street lamp
Comparison of advantages and disadvantages of integrated solar street lamp and split solar street lamp:
1, the advantages of integrated solar street lamp, on the one hand, is easy to install and use, customers can in the absence of any professional knowledge, simply install a few screws according to the instructions, fixed the product can be used, very convenient and save the installation cost.
2, the price advantage is obvious, the integrated solar street lamp because of the design reason, the panel power and battery capacity is generally relatively small, the cost is relatively low. More because it saves the cost of installing the fixed bracket of the panel, the cost of the battery box and so on, compared with the split solar street lamp, the price is relatively lower. His application occasions are not too high lighting requirements, in contrast, the price advantage is very obvious. Usually, the price of split street lamps is about 40% to 60% more expensive than integrated solar street lamps.
3, Split solar street light adopts the separate design of panel, battery and LED lamps. According to the requirements of lighting occasions, the required power of led street light can be calculated, with the power optional range of 20W-120W to meet the requirements of different customers. And according to the requirements of LED street lamp, suitable power panels and batteries can be adapted, which can not only ensure the service life of LED street lamp, but also because the conventional battery and intelligent controller is placed at the bottom of the light pole, convenient maintenance and replacement, saving the later maintenance cost.
4, split solar street lamp maintenance is much more complex, when there is damage, the manufacturer needs to send technicians to the local maintenance, maintenance needs to be from the battery, photovoltaic panel, LED lamp, wire and other troubleshooting; All-in-one solar street lamps just need to be unloaded and sent back to the factory.
Split solar street lamp
5, In terms of the scope of use, according to the technical parameters, split solar street lights are generally mainly used in large roads, highways and other places with high demand for lights, while integrated solar street lights can be used in streets, communities, factories, rural areas, county streets, village streets and other places.
6, in terms of technical parameters, split solar street technical parameters can be from 10-80W or even higher, such as: new rural solar street series, in the configuration, according to the wattage, rainy days and other technical parameters to the corresponding configuration of battery, photovoltaic panel size, controller, but also need to adjust the photovoltaic panel irradiation Angle according to the actual installation; Integrated solar street lamps now generally have several wattage of 10w, 20w, 30w and 40w, each of which is the best configuration based on a long time experiment, such as 3-6 meters 20W new rural solar street lamps.
The above is the structure and advantages and disadvantages of integrated solar street lamp and split solar street lamp. It is not difficult to find that the two have great differences in component structure, price, range of use, installation and maintenance methods, technical parameters and other aspects, but each has its own advantages.